Brian Crower - CAMSHAFTS - STAGE 3 (Subaru EJ257 - 04-07 STi) SET/4
Brian Crower

Brian Crower - CAMSHAFTS - STAGE 3 (Subaru EJ257 - 04-07 STi) SET/4

$708.07
Current Stock:
SKU: BC0622
Manufacturer Part Number BC0622
A series of low-volume versions with even greater power and grip were built by Subaru's in-house modifier, Subaru Tecnica International (STi). STi versions of the Impreza, which produced 280 PS (206 kW) from new, are often raced, largely unmodified, in the Group N class in various rally championships to great success. Introduced in 1994, the STi has proven to be a very popular high-performance machine in the Japanese domestic market. Introduced to the United States in 2004, the US model STi features the larger displacement 2.5L (EJ257) that features AVCS.

Bucket Diameter: 1.200"

Note: Intake camshafts are setup for AVCS operation. The above cams WILL WORK with AVCS. If running non AVCS setup is desired, you must install the four set screws (located in a plastic bag attached to the cam bag) in the front of each intake cam (dowel pin side) using a 2.5mm Allen wrench and LocTite. This will not allow oil to actuate the Active Valve Control System. These cams do not fit the 2008-up STi with dual AVCS.


Race Specification
Longer duration profile, added rpm potential. Intended for fully built engine. Tuning and ECU mods recommended. Requires kit BC0600.

Lift: 10.80/10.80
Duration: 280/280
Position: Intake/Exhaust
Full Description
Qty
  • Description
    A series of low-volume versions with even greater power and grip were built by Subaru's in-house modifier, Subaru Tecnica International (STi). STi versions of the Impreza, which produced 280 PS (206 kW) from new, are often raced, largely unmodified, in the Group N class in various rally championships to great success. Introduced in 1994, the STi has proven to be a very popular high-performance machine in the Japanese domestic market. Introduced to the United States in 2004, the US model STi features the larger displacement 2.5L (EJ257) that features AVCS.

    Bucket Diameter: 1.200"

    Note: Intake camshafts are setup for AVCS operation. The above cams WILL WORK with AVCS. If running non AVCS setup is desired, you must install the four set screws (located in a plastic bag attached to the cam bag) in the front of each intake cam (dowel pin side) using a 2.5mm Allen wrench and LocTite. This will not allow oil to actuate the Active Valve Control System. These cams do not fit the 2008-up STi with dual AVCS.


    Race Specification
    Longer duration profile, added rpm potential. Intended for fully built engine. Tuning and ECU mods recommended. Requires kit BC0600.

    Lift: 10.80/10.80
    Duration: 280/280
    Position: Intake/Exhaust