AEM X-Series 0-160 MPH Black Bezel w/ Black Face GPS Speedometer Gauge (30-0313) AEM X-Series 0-160 MPH Black Bezel w/ Black Face GPS Speedometer Gauge (30-0313)
AEM

AEM X-Series 0-160 MPH Black Bezel w/ Black Face GPS Speedometer Gauge

$146.03

AEM Performance Electronics' X-Series GPS Speedometer (PN 30-0313) displays ground speed, course and altitude via an included 10Hz GPS receiver. Users can integrate the X-Series GPS Speedo into an Infinity ECU, AQ-1 Data Logger or upcoming AQ-1 OBDII Data Logger to add track mapping! It includes a Vehicle Speed signal output that can be connected to an existing speedometer and eliminate the need for a vehicle speed sensor. 

A 10Hz GPS receiver receives speed, heading and altitude data from multiple satellites at 10 samples/second providing excellent accuracy and reliability. The GPS receiver includes a magnet and adhesive bottom for exterior mounting on the vehicle. 

The X-Series GPS Speedometer Gauge has a bright four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. X-Series Gauges come with a black bezel and faceplate, and an optional silver bezel/white faceplate accessory kit is available (PN 30-0313-ACC, sold separately). 

Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.

Features:

  • Displays ground speed, heading and altitude!
  • Integrate with the Infinity ECU, Series 2 or EMS-4 via AEMnet CAN bus to add track mapping!
  • Center LEDs display up to maximum vehicle speed!
  • Outer LEDs display speed up to 160 MPH/257KPH
  • Transmit vehicle speed to an existing speedometer without needing a VSS sensor
  • User selectable units of measurement (US or Metric)
  • 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods
  • Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!
  • 24 green outer LEDs for quick reference to vehicle speed
  • Optional silver bezel with white faceplate accessory kit available (sold separately)
  • Auto dimming sensor delivers ideal display brightness
  • Positive locking connector provides secure connection
  • Compatible with 16v vehicle systems

Application:  Universal

Full Description
Qty
  • Description

    AEM Performance Electronics' X-Series GPS Speedometer (PN 30-0313) displays ground speed, course and altitude via an included 10Hz GPS receiver. Users can integrate the X-Series GPS Speedo into an Infinity ECU, AQ-1 Data Logger or upcoming AQ-1 OBDII Data Logger to add track mapping! It includes a Vehicle Speed signal output that can be connected to an existing speedometer and eliminate the need for a vehicle speed sensor. 

    A 10Hz GPS receiver receives speed, heading and altitude data from multiple satellites at 10 samples/second providing excellent accuracy and reliability. The GPS receiver includes a magnet and adhesive bottom for exterior mounting on the vehicle. 

    The X-Series GPS Speedometer Gauge has a bright four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. X-Series Gauges come with a black bezel and faceplate, and an optional silver bezel/white faceplate accessory kit is available (PN 30-0313-ACC, sold separately). 

    Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.

    Features:

    • Displays ground speed, heading and altitude!
    • Integrate with the Infinity ECU, Series 2 or EMS-4 via AEMnet CAN bus to add track mapping!
    • Center LEDs display up to maximum vehicle speed!
    • Outer LEDs display speed up to 160 MPH/257KPH
    • Transmit vehicle speed to an existing speedometer without needing a VSS sensor
    • User selectable units of measurement (US or Metric)
    • 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods
    • Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!
    • 24 green outer LEDs for quick reference to vehicle speed
    • Optional silver bezel with white faceplate accessory kit available (sold separately)
    • Auto dimming sensor delivers ideal display brightness
    • Positive locking connector provides secure connection
    • Compatible with 16v vehicle systems

    Application:  Universal

  • Reviews

    Reviews

    Be the first to

  • Details

    Details

    Current Stock:
    SKU: 30-0313
    Manufacturer Part Number 30-0313